SMART Charge – Digital Inflator/Charge Unit | 2m/6’7” Hose | 12V1 Long Nose Screw on Inflator Assembly (large bore)

SMART Charge large bore long nose (12V1) inflator with digital display (bar or psi) for safe and accurate tyre inflation & deflation with operational pressure range 6-350psi (0.4-24bar) LCD pressure activated display with back light for low light conditions. Integral safety relief valve to prevent any tyre over inflation or incorrect inlet pressure supply.

The ergonomic lightweight design incorporates a “2 click action” trigger for ease of use with robust die cast aluminium protective housing and rubber shield, powered with 2xAAA batteries provides 12 -24 months usage. CE approved, tested to EMC standards meets EN837-1 & PED

Complete long nose 12V1 screw-on tyre valve connector with  2m (hydraulic oil resistant) armoured 4G1 charge hose. See our full range of nose docks here.

This product is part of our GSE equipment range.

Other tyre charge connector solutions available:

Part Number: 890.120.06 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 8V1 Screw on Connector

Part Number: 890.120.07 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 12V1 Screw on Connector

Part Number: 890.120.12 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 8V1 Long Nose Screw on Inflator Assembly

Part Number: 890.120.18 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose Special 8V1 Screw on Inflator Assembly