SMART Charge – Digital Inflator/Charge Unit | 2m/6’7” Hose | Special 8V1 Screw on Inflator Assembly

SMART Charge Special (8V1) inflator with digital display (bar or psi) for safe and accurate tyre inflation & deflation with operational pressure range 6-350psi (0.4-24bar) LCD pressure activated display with back light for low light conditions. Integral safety relief valve to prevent any tyre over inflation or incorrect inlet pressure supply.

The ergonomic lightweight design incorporates a “2 click action” trigger for ease of use with robust die cast aluminium protective housing and rubber shield, powered with 2xAAA batteries provides 12 -24 months usage.

CE approved, tested to EMC standards meets EN837-1 & PED.

Complete 8V1 special screw-on inflator assembly with 2m (hydraulic oil resistant) armoured 4G1 charge hose.

View more of the ground support equipment range.

Long nose screw-on tyre charge connector & other solutions available:

Part Number: 890.120.06 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 8V1 Screw on Connector

Part Number: 890.120.07 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 12V1 Screw on Connector

Part Number: 890.120.12 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 8V1 Long Nose Screw on Inflator Assembly

Part Number: 890.120.13 SMART Charge – Digital Inflator/Charge Unit 0-350psi / 0-24.13bar with 350psi relief valve 2m/6’7” Hose 12V1 Long Nose Screw on Inflator Assembly